化学物質分析・規制対応

クリンリネス物質分析・熱分析

クリンリネス物質分析

プリント配線板材料のグリーン調達の観点から求められる規制物質の定量試験を行います。有機シリコン、トータルアニオン(塩化物イオン、臭化物イオン、ふっ化物イオン、硝酸イオン、亜硝酸イオン、硫酸イオン、りん酸イオン)、カチオン(アンモニウムイオン)の含有量を、FTIR-ATR法およびイオンクロマトグラフ法から評価します。

フーエル変換赤外分光分析 FT-IR

排水分析(無機元素分析)

排水液中の規制無機物質の定量試験を行っています。ICP発光分光分析装置、フレーム原子吸光光度計による高感度な定量が可能です。銅(Cu)、亜鉛(Zn)をはじめ、様々な無機元素に対応可能です。

フレーム原子吸光光度分析装置 AA

熱分析

動的粘弾性分析装置 DMA 熱重量分析装置 TGA
示差走査熱量分析装置 DSC

 


お問い合わせ先
担当:河戸 淳仁
TEL: 03-3727-7111 

環境分析 お問い合わせ
評価・業務案内一覧

規格一覧表

試験名 規格番号 規格名 対象製品など
クリンリネス物質分析 クリンリネス物質調査票/グリーン調達ガイドライン フレキシブルプリント配線板材料全般
工場排水試験 JIS K 0102 工場排水試験方法 排水
ハロゲン分析 IPC-TM-650 2.3.41 Test Method for Total Halogen Content in Base Materials 基板
IEC 61189-2 Test methods for electrical materials, printed boards and other interconnection structures and assemblies 基板、基板材料
JPCA-ES01 ハロゲンフリー銅張積層板試験方法 銅張積層板
UL 746E Polymeric Materials – Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards 基板、高分子材料
BS EN 14582 Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods 基板材料、電子機器材料
IEC 62321-3-2 Determination of certain substances in electrotechnical products – 3-2: Screening – Total bromine in polymers and electronics by Combustion – Ion Chromatography 電子・電気製品
フーリエ変換型赤外分光分析(FT-IR) UL746A Polymeric Materials – Short Term Property Evaluations 高分子材料
UL746E Polymeric Materials – Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards 高分子材料
ASTM E 1421-99 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests 高分子材料
ASTM E 1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis 高分子材料
熱重量測定(TGA) UL746A Polymeric Materials – Short Term Property Evaluations 高分子材料
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) 絶縁材料
ASTM E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method 絶縁材料
ISO 11358 Thermogravimetry (TG) of polymers – General principles 高分子材料
示差走査熱量測定(DSC) UL746A Polymeric Materials – Short Term Property Evaluations 高分子材料
ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry 高分子材料
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry 高分子材料
ASTM E698-16 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and Flynn/Wall/Ozawa method 絶縁材料
ISO 11357 Plastics — Differential scanning calorimetry (DSC) 高分子材料
動的粘弾性測定(DMA) ASTM D4065-12 Standard Practice for Plastics: Dynamic Mechanical Properties:Determination and Report of Procedures 高分子材料
ASTM D4092 Standard Terminology for Plastics: Dynamic Mechanical Properties 高分子材料
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) 高分子材料
ASTM D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension 高分子材料
ASTM D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) 高分子材料