There has been a growing demand for miniaturization, high integration, and weight reduce in electrical and electronic equipment, vehicles, and aircraft. Hence the high level flame resistance is now required for Polymeric Materials that are used for exterior items and parts of printed wiring boards, as well as adhesives. Our over 40 years experience in flammability testing can support research, development, and quality control of flame resistant materials according to various standards, including UL94, and FMVSS 302 Flammability Test for Motor Vehicle Interiors.
We are also available for the flammability test for particular objectives.
○ UL DAP (Data Acceptance Program)
Our test data is accepted by UL. We can provide test results in a timely manner.
○ FMVSS 302 Flammability Test for Motor Vehicle Interiors
FMVSS 302 Flammability Test for Motor Vehicle Interiors evaluates the burn resistance of occupant compartments in motor vehicles, such as passenger cars, multipurpose passenger vehicles, trucks, and buses. In order to respond to the growing needs to FMVSS 302 Flammability Test, we organized a system that enables us to conduct this evaluation in a speedy manner. We prepared three sets of sample holders for FMVSS 302 tests so that we can handle more samples and submit test data in shorter delivery time.
○ Flammability test of electric wires, cables, insulating tapes (VW-1 Flammability Test)
Many essential components of electrical appliances
such as electric wires, cable coverings, and
insulating tapes are made of polymeric materials.
Such polymeric materials are required to pass the
VW-1 flammability test. Chemitox has the latest
large fume hood for flammability testing that
enables us to conduct the VW-1 test in an efficient
and safe test environment.
○ Preliminary Test for Research and Development
You can conduct preliminary tests to evaluate your product which is under development. We can modify the sample quantity and test procedure as required even if they are not necessarily based on the actual standard. If you are not sure about the proper test method, we can suggest the best test method that corresponds with the materials and sales strategy of your company. We also have knowledge and experience in handling soft or adhesive samples. Please feel free to contact us.
○List of Our Flammability Test Services
Test Name | Reference Standard |
HB | UL94 / IEC60695-11-10 / JIS K6911 |
V | UL94 / IEC60695-11-10 / JIS K6911 |
VTM | UL94 / ISO9773 |
5V | UL94 / IEC60695-11-20 |
HBF | UL94 / ISO9772 |
UL746C
Flammability (12 mm, 20 mm, 127 mm) |
UL746C |
IEC/UL90650-1
Flammability (Annex A1, A2) |
IEC/UL60950-1 |
Needle-Flame | IEC60695-11-5 / UL1694 |
Candle-Flame | IEC TS62441 |
Flammability
of Motor Vehicle Interiors (FMVSS302, and other) |
FMVSS 302 / JIS D1201
/ SAE J369 / ISO3795 / ASTM D5132 |
VW-1 | UL224 / UL510 / UL1441 / UL1581 |
Hot Wire Ignition | UL746A / ASTM D3874 |
Glow
Wire (GWFI, GWIT, GWEPT) |
IEC60695-2-10 – 13 / UL746A |
Radiant Panel | ASTM E162 / IEC61730-1 / UL94 |
Flammability Test | IEC 61730-2 / UL790 / UL1703 |
Contact Information
PIC: Hitoshi Watanabe (Mr.)
TEL: +81-551-42-5061