Cleanliness Material Analysis
We can conduct the quantitative test for regulated substances that are required for green procurement of printed wiring board materials. We evaluate the amount of organic silicon, total anion (chloride ion, bromide ion, fluoride ion, nitrate ion, nitrite ion, sulfate ion, phosphate ion), Cation (ammonium ion), by the FTIR-ATR method, as well as the ion chromatographic method.
Drainage Analysis (Inorganic Elemental Analysis)
We conduct the quantitative test for the regulated inorganic materials in drainage water. We can conduct high precision quantification by using the flame type atomic absorption photometer, and ICP emission spectro-photometer. We can also conduct evaluations on various inorganic elements, such as copper (Cu), and zinc (Zn).
Thermal Analysis
Contact information
PIC: Muto (Ms.)／ Sumida (Mr.)
TEL: +81-3-3727-7111
List of Standards
| Test Name | Standard Number | Standard Name | Subjected Products, and etc |
|---|---|---|---|
| Cleanliness Material Analysis | － | Cleanliness Material Analysis Questionnaire / Green Procurement Guideline | Flexible Printed Wiring Board Materials in General |
| Industrial Drainage Test | JIS K 0102 | Methods of Industrial Drainage Test | Drainage |
| Halogen Analysis | IPC-TM-650 2.3.41 | Test Method for Total Halogen Content in Base Materials | Substrate |
| IEC 61189-2 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies | Substrate, Substrate Material | |
| JPCA-ES01 | Test Method of Halogen Free Copper Clad Laminate | Copper Clad Laminate | |
| UL 746E | Polymeric Materials – Industrial Laminates, Filament Wound Tubing, Vulcanized Fiber, and Materials Used In Printed-Wiring Boards | Substrate, Substrate Material | |
| BS EN 14582 | Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods | Substrate Material, Electric Device Material | |
| IEC 62321-3-2 | Determination of certain substances in electro-technical products – 3-2: Screening – Total bromine in polymers and electronics by Combustion – Ion Chromatography | Electronic・Electric Device | |
| Fourier Transform Infrared Spectroscopy (FT-IR) | UL746A | Polymeric Materials – Short Term Property Evaluations | Polymer Materials |
| UL746E | Polymeric Materials – Industrial Laminates, Filament Wound Tubing, Vulcanized Fiber, and Materials Used In Printed-Wiring Boards | Polymer Materials | |
| ASTM E 1421-99 | Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests | Polymer Materials | |
| ASTM E 1252-98 | Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis | Polymer Materials | |
| Thermal Gravimetric Analysis (TGA) | UL746A | Polymeric Materials – Short Term Property Evaluations | Polymer Materials |
| ASTM D3850-12 | Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermo-gravimetric Method (TGA) | Insulating Materials | |
| ASTM E1641-16 | Standard Test Method for Decomposition Kinetics by Thermo-gravimetry Using the Ozawa/Flynn/Wall Method | Insulating Materials | |
| ISO 11358 | Thermo-gravimetry (TG) of polymers – General principles | Polymer Materials | |
| Differential Scanning Calorimetry (DSC) | UL746A | Polymeric Materials – Short Term Property Evaluations | Polymer Materials |
| ASTM D3418-15 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry | Polymer Materials | |
| ASTM E1269-11 | Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry | Polymer Materials | |
| ASTM E698-16 | Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and Flynn/Wall/Ozawa method | Insulating Materials | |
| ISO 11357 | Plastics — Differential scanning calorimetry (DSC) | Polymer Materials | |
| Dynamic Mechanical Analyzer (DMA) | ASTM D4065-12 | Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures | Polymer Materials |
| ASTM D4092 | Standard Terminology for Plastics: Dynamic Mechanical Properties | Polymer Materials | |
| ASTM D5023-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) | Polymer Materials | |
| ASTM D5026-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension | Polymer Materials | |
| ASTM D5418-15 | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) | Polymer Materials |