JAPANESE SITE | SITEMAP

UL CAP EVALUATION

PLASTICS


 
 UL 94 Horizontal Burning (HB)     UL 764A Comparative Tracking Index (CTI)

Chemitox has over 35 years of experience in the testing of plastics. Please see below for tests currently certified under CAP:



TESTS APPLICABLE STANDARD
Horizontal Burning (HB) UL 94
Vertical Burning (V) UL 94
500W (125 mm) Vertical Burning (5V) UL 94
Vertical Burning for Thin Material (VTM) UL 94
Horizontal Burning for Foamed Material (HF) UL 94
Tensile Strength (TS) UL 746A
Tensile Impact (TI) UL 746A
IZOD Impact (IZOD) UL 746A
Flexural Strength (FS) UL 746A
Bond Strength (BS) of Plated Polymeric Materials UL 746A
Dielectric Strength (DS) UL 746A
Volume Resistivity (VS)/Surface Resistivity (SR) UL 746A
High Voltage, Low Current, Dry Arc Resistance (D495) UL 746A
Comparative Tracking Index (CTI) UL 746A
Hot Wire Ignition (HWI) UL 746A
High-Voltage Arc-Tracking-Rate (HVTR) UL 746A
High-Voltage Arc Resistance (HVAR) UL 746A
High-Current Arc Ignition (HAI) UL 746A
Ball Pressure UL 746A
Glow-Wire Ignitability UL 746A
Long-Term Thermal Aging UL 746B
Flammability - Needle Flame UL 746C
Flammability - 3/4 inch Flame UL 746C
Flammability - 5 inch Flame UL 746C
Flammability - 5VS UL 746C


Tests Covered by UL 1950, Annex


TESTS APPLICABLE STANDARD
Horizontal Burning (HB) UL 1950 (UL 94)
Vertical Burning (V) UL 1950 (UL 94)
500W (125 mm) Vertical Burning (5V) UL 1950 (UL 94)
Horizontal Burning for Foamed Material (HF) UL 1950 (UL 94)
Hot Wire Ignition (HWI) UL 1950 (UL 746A)
Flammability - 3/4 inch Flame UL 1950
Flammability - 5 inch Flame UL 1950


For Further Details about these Tests, Contact:
Hiroaki Fujioka (hi-fujioka@chemitox.co.jp)